The CD-500-FH HV Fully Hydraulic Drive centrifuge is specially engineered for high-volume drill solids removal and separation. CD-500-FH HV is also designed for barite recovery and dewatering. An efficient separation is not only better under an economical point of view but it is preferable for the environmental preservation too.

Feature and benefits

• High Volume: Process up to 682 GPM / 2.593 l/min / 155 m³/h
• Variable Speed Bowl: From 0 to 3400 rpm
• High force G: Up to 2998g at 3400rpm
• Variable Speed pump: To improve solids control efficiency
• Higher solids removal than conventional centrifuge
• Higher barite recovery than conventional centrifuge
• Automatic and manual control
• Higher torque resistance than conventional centrifuge
• Solids pack-off removal device

Physical Data*

• Length: 4.146mm (163,23”)
• Width: 2.220mm (87,40”)
• Height: 2.290mm (90,16”)
• Total Weight: 6.401kg (14112 lbs)
• Max torque: 8500Nm (6269 ft·lbs)
• System power: 100HP (75kW) Electric Motor
• Drive system: Hydraulic independent system
  
• Main drive pump: Parker P6P
• Back drive pump: HP
• Control system: PLC in automatic or manual control mode
  

* All technical specifications are normal values and may vary from the information given above in the case of different configurations.

The CD-600-FH Fully Hydraulic Drive centrifuge is specially engineered for high-volume drill solids removal and separation. CD-600-FH is also designed for barite recovery and dewatering. An efficient separation is not only better under an economical point of view but it is preferable for the environmental preservation too.

Feature and benefits

• High Volume: Process up to 791 GPM / 2.994 l/min / 180 m³/h
• Variable Speed Bowl: From 0 to 2800 rpm
• High force G: Up to 2585g at relative low speed due to the big bowl diameter.
• Variable Speed pump: To improve solids control efficiency
• Higher solids removal than conventional centrifuge
• Higher barite recovery than conventional centrifuge
• Automatic and manual control
• Higher torque resistance than conventional centrifuge
• Solids pack-off removal device

Physical Data*

• Length: 4.586 mm (180.55”)
• Width: 2.210mm (87,01”)
• Height: 2.095mm (82,48”)
• Total Weight: 8.665kg (19103 lbs)
• Max torque: 12500Nm (9330 ft lbs)
• System power: 132kW main electric motor
• Drive system: Hydraulic independent system
  
• Main drive pump: Parker P6P
• Back drive pump: HP
• Control system: PLC controlled or manual control
  

* All technical specifications are normal values and may vary from the information given above in the case of different configurations.